Svantek SVAN 106, User Manual

Page: 31 / 97

SVAN 106 User MANUAL
_
31
Setting the measurement type for channels 1-3 and 4-6
Positions 1-3 Dosimeter and 4-6 Dosimeter enable the user to set the
desired type of the measurement, performed with the use of channels 1,2,3
and 4,5,6 – hand-arm (HAV) or whole-body (WBV) vibration.
Setting the exposure time
The Exposure Time enables the user to set the desired value of the
exposure time that is used for the calculation HAV/WBV Dose results. The
Exposure Time values are within the range [00h01, 24h00].
Setting the standard for dose measurements
The Standard position enables the user to set the standards for the
measurements of the HAV/WBV Dosimeter. The available values of this
position are U.K., Italy, Poland, France, Germany and User.
Depending of settings in the position Standard it is possible to view (U.K.,
Italy, Poland, French, Germany) or edit (User) limits for dose calculation.
View or edition of the limits for dose
calculation
The View Standard Limits position opens
the window with the coefficients for the
selected standard.
<ENT>
When the User is selected in the Standard
position then the Edit User Limits position
appears on the screen where the user can
set up its own coefficients.
<ENT>
5.3 Setting parameters in a channels – Channels Setup