Svantek SVAN 106, User Manual

Page: 85 / 97

SVAN 106 User MANUAL
_
85
The trigger condition can be defined for the selected in the position Result
bandpass of 1/1 Octave filters (0.50 Hz, 1.00 Hz, 2.00 Hz, 4.00 Hz,
8.00 Hz, 16.0 Hz, 31.5 Hz, 63.0 Hz, 125 Hz, 250 Hz, 500 Hz, 1.00 kHz and
2.00 kHz), or 1/3 Octave filters (0.40 Hz, 0.50 Hz, 0.63 Hz, 0.80 Hz,
1.00 Hz, 1.25 Hz, 1.60 Hz, 2.00 Hz, 2.50 Hz, 3.15 Hz, 4.00 Hz, 5.00 Hz,
6.30 Hz, 8.00 Hz, 10.0 Hz, 12.5 Hz, 16.0 Hz, 20.0 Hz, 25.0 Hz, 31.5 Hz,
40.0 Hz, 50.0 Hz, 63.0 Hz, 80.0 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz,
250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1.00 kHz, 1.25 kHz,
1.60 kHz, 2.00 kHz, and 2.50 kHz), Total Level results with appropriate
filters can also be selected as a source: Total 1 (HP), Total 2 (Wd),
Total 3 (Bl Wd).
10.5. Display options in 1/1 Octave and 1/3 Octave analysis mode
The Display list is used for setting the
various parameters, which are mainly
dedicated for the control of the spectrum
view. The following windows contain the
elements that influence the presentation of
the results of 1/1 Octave and 1/3 Octave
analysis:
<ENT>
Display Modes enables one to switch on the spectrum presentation mode;
Spectrum Display Setup enables one to select options for spectrum presentation:
Spectrum Scale to change the scale of the vertical axis of the graphical presentation, switch
on or off the grid, switch on or off autoscale;
Spectrum View to choose the type of the spectrum to be presented;
Multichannel View to select how many channels will be displayed simultaneously,
Total Values to select parameters for Total Values presentation.
10.6. Presentation of 1/1 Octave and 1/3 Octave analysis results
The Single Spectrum and
Multiple spectrum positions of the
Display Modes list are accessible only for
1/1 Octave and 1/3 Octave functions.
When Single Spectrum mode is switched
on the measurement screen in Spectrum
visualisation mode is like below.
=>