Svantek SVAN 106, User Manual

Page: 33 / 97

SVAN 106 User MANUAL
_
33
The Channel x positions enable one to set
up or display parameters for the individual
channel, like input type and filters for
profiles.
If Dosimeter is active the first profile filter is
set by default and it cannot be changed.
When second profile is switched off the
filter for second profile doesn’t appear as
parameter in the list.
Input type and range selection
The following inputs are available: IEPE and Direct.
The Range value cannot be changed; it always depends on the filter type
and calibration factor. If calibration factor is equal to zero the range is equal
to 126 m/s
2
. .
Weighting filter selection
The following weighting filters are available for the first profile of the
instrument: Wh, Wk, Wd, Wc, Wj, Wm, Wg, Wb and Wf. The
characteristics of the filters are given in App. D.
The set of filters for the profile two is depending of the filter selected for
profile one. There is always available filter HP. Second available filter for
profile 2 is one of: BL Wh, BL Wk, BL Wd, BL Wc, BL Wj, BL Wm,
BL Wg, BL Wb and BL Wf; according to the rule – if Wh filter is selected in
the profile 1 then the apart of HP only BL Wh filter is available for profile 2.
If Wk filter is selected in the profile 1 then the apart of HP only BL Wk, filter
is available or profile 2. And so on.
When Dosimeter function is active the filters for first profiles are predefined and depend on type of
dosimeter measurements for the channels – WBV or HAV.
If WBV measurements are performed in channels 1-3 or 4-6 the filters defined for channels are as follows:
Channel 1 or 4: Wd, Channel 2 or 5: Wd, Channel 3 or 6: Wk.
If HAV measurements are performed in channels 1-3 or 4-6 the filters defined for channels are as follows:
Channel 1 or 4: Wh, Channel 2 or 5: Wh, Channel 3 or 6: Wh.
If second profile is active during Dosimeter measurements, the filter can be HP or one of from BL Wd,
BL Wk or BL Wh depending on what filter was predefined for the first profile of the chosen channel,
according to the rule described above.
RMS detector