Svantek SVAN 106, User Manual

Page: 21 / 97

SVAN 106 User MANUAL
_
21
4. FUNCTIONS OF THE INSTRUMENT – Function
In order to select the Function list one has
to press the <Menu> push-button, select
the Function text and press <ENTER>.
The Function list contains two elements:
Measurement Function and Calibration.
<ENT>
4.1. Measurement functions of the instrument - Measurement Function
The main function of the instrument is the measurement of Vibration level (Level Meter) meeting the
ISO 8041:2005 standard. The instrument can also be used for the long-term vibration monitoring using for
this purpose the huge logger, in which the measurement results are stored.
The user may also use 1/1 and 1/3 octave analysis functions. These functions broaden the main Level Meter
functions of the instrument, because 1/1 and 1/3 analysis is performed together with all calculations of Level
Meter functions.
In all functions it is possible to perform additionally dose measurements. Dose parameters are setting up in
HAV/WBV Dose window (path: <Menu>/ Measurement).
In order to select the required function the
user
has to enter the
Measurement Function list. After entering
the Measurement Function list, the set of
the available functions appears on the
display:
Level Meter. Currently active
function is marked.
<ENT>
The type of measurement function and the measurement mode is displayed at the upper line of the screen:
- LM Level Meter,
- 1/1 1/1 Octave,
- 1/3 1/3 Octave,
- DLM Dose & Level Meter,
- D1/1 Dose & 1/1 Octave,
- D1/3 Dose & 1/3 Octave.
Optional functions that broadening the applications of the instrument can be install. These options can be
supported by the producer or purchased later.
Notice: It is not possible to change the measurement function during the measurements. The
instrument displays in this case for about 3 seconds the text: “Measurement in Progress”. In
order to change the mode of the instrument the measurement must be finished!