SVAN 106 User MANUAL
_
35
Depending on Logging Mode (Logger or
Wave), set up in the General Settings list
the
Data Logging
window
will
have
different view.
This is an example of Data Logging
window
in
Simple Mode
and
Logging Mode = Logger.
=>
Wave recording is enabled only in
advanced instrument mode.
When Wave function is chosen for the
Logging Mode, the Data Logging list
consists
of
three
active
positions:
Logger Setup,
Wave Channels
and
Wave Trigger.
=>
5.6 The results history logging
When Logger function is chosen for the Logging Mode, the Data Logging list enables one to program
saving the history of results in the logger file.
Depending on the Instrument Mode, the
Data Logging list consists of two positions
in case of Simple Mode: Logger Setup,
Logger Results; or consists of four to five
active
positions
in
case
of
Advanced Mode:
Logger Setup,
Logger Results,
Logger Trigger,
Event Recording (which in turn is active
when Event Recording position in the
General Settings list would be active) and
Marker Setup.
5.6.1 Data logger programming – Logger Setup
Summary of Contents for SVAN 106
Page 49: ...SVAN 106 User MANUAL _ 49...
Page 82: ...SVAN 106 User MANUAL _ 82...
Page 96: ...SVAN 106 User MANUAL _ 96 ENT ENT ENT ENT...
Page 97: ...SVAN 106 User MANUAL _ 97...
