Svantek SVAN 106, User Manual

Page: 86 / 97

SVAN 106 User MANUAL
_
86
The user may shift the Y-axis during the
spectrum presentation after pressing the
<Shift> and <
5 5 5 5
> (or the <Shift> and
<
6 6 6 6
>) push-buttons.
<Sh/
6
6 6
6
>
The user may change the cursor position
by means of the <
3
3 3
3
>, <
4
4 4
4
> push-buttons.
The frequency and appropriate value are
presented in the line below the plot.
<
4 4 4 4
>...
When Multiple spectrum mode is switched
on the measurement screen in Spectrum
visualisation mode is like below.
=>
10.7. Setting the scale of the spectrum results presentation – Spectrum Scale
The Spectrum Scale sub-list enables the
user to change the scale in the available
modes of graphical presentation of the
measurement results and switch on/off the
grid.
<ENT>
Setting the scale of the measurement
results presentation
Two options are available for the Scale
position: Linear and Logarithm. In the
case of the first one the graphical
presentation and the units both are linear.
In the latter case the graphical presentation
is given in the logarithmic scale and the
measurement results are expressed in
decibels (the result is related to the values