66
SV106A User Manual
The
Start Setup Manager
sub-list is
used for selection of the user defined
setup files for the
Select Setup
list.
<ENT>
In order to select setup file to be included
in the
Select Setup
list, please press the
<ENTER>
push-button at any of the
positions in the list, initially marked as
empty.
Please
select
Replace
,
Insert Above
or
Insert Below
to add new
setup file in desired position against the
previously selected entry of the list.
<ENT>
Please select setup file from the
instrument memory and press the
<ENTER>
push-button to assign it to the
desired position in the
Select Setup
menu.
Repeat this procedure to assign more
setup files at other positions of this list, if
desired.
<ENT>
The
Inset Above
or
Insert Below
commands enable the user to put setups
above or below the selected line.
If
<ENTER>
is pressed at an existing
assignment the
Remove
option will also
be available. Command will remove the
assignment, but not the setup file.
<ENT>
When instrument is restarted, it will show
entries from the user-edited list of
Start Setup Manager
in between the
Whole-Body 1
and
Factory Settings
options. Selected setup will be loaded
upon pressing the
<ENTER>
push-
button.
<On>
7.5 Data storing options - Save Options
The
Save Options
sub-list is used for the
selection of the options of storing data in
the files.
It is possible to replace an existing file in
the memory by a new file with the same
name (
Replace
), to save automatically the
results of the measurements (
Auto Save
),
to save the results with the automatically
incremented name (
Direct Save
).
<ENT>
The
Minimum Spectrum
and
Maximum Spectrum
options became active for the
1/1 Octave
and
1/3 Octave
functions.
