57
SV106A User Manual
There are two options for the
Scale
parameter:
Linear
and
Logarithm
. In the
case of
Linear
all the results are shown
in linear units. In case of
Logarithm
the
measurement results are expressed in
decibels (the results are related to the
values set in the
Reference Level
window (
path: <Menu> / Auxiliary Setup
/ Reference Levels
).
6.4
Setting the display brightness and power saver- Screen
The
Screen
window enables the user to
set the brightness of the display and to
switch on the screen saver.
Setting the brightness of the display
The
Brightness
enables the user to set
the proper brightness of the display by
means of the
<
>
,
<
>
push-buttons.
The user can select 20 different values of
this parameter.
<ENT>
Note: The new value of the brightness is confirmed after each press of the <
> or <
> push-
buttons (new value is selected without any confirmation from the <ENTER> push-button).
Setting the power saver function
The saving of the internal source of the instrument’s power can be achieved
by means of reducing the brightness of the screen when possible.
It is possible to set the
Power Saver
automatically. The screen may be
switched off (
Screen Off
) or dimmed (
Dim
). When either of these options
is
selected,
after
number
of
seconds,
defined
in the line
Power Saver Delay
, from pressing
any push-button
the screen is
switched off or dimmed. If it has been set, the first press of any push-button
will cause the switch-on of the screen. The
Power Saver
function may also
be deactivated if the
Disabled
parameter is selected and the screen will
stay on all the time.
Setting the power saver delay
The
Power Saver Delay
parameter defines the delay period from last use
of any push-button to enter the Power saver mode. This delay period can
be set from
5 s
to
60 s
.
