65
SV106A User Manual
Loading the setup file means that the
settings saved in this file will be loaded to
the instrument's flash memory. So if the
user presses the
<Start/Stop>
push-button
the instrument will start the measurement
with the newly loaded settings.
<ENT>
Command
Add to start menu
adds the
current setup file to the list of setups the
user may choose in the
Select Setup
window (see next chapter).
Command
Rem. from start menu
removes the current setup file from the list
of setups the user may choose in the
Select Setup
window (see next chapter).
=>
To get information about the setup file the
user should select the file and press the
<ENTER>
push-button. After opening the
list of commands select the
Info
position
and press the
<ENTER>
push-button
again.
<ENT>
7.4 Options for Select Setup menu
– Start Setup Settings
The
Start Setup Settings
sub-list opens
a window which enables the user to adjust
the
Select Setup
menu which appears at
the instrument start-up.
Setups from this list can be quickly
selected and loaded during the instrument
start-up.
<ENT>
The
Show Start Menu
position switches
on/off
the
appearance
of
the
Select Setup
menu.
The
Show Factory Sett.
position
switches on/off the appearance of the
factory defined setups for hand-arm and
whole-body
measurements
(
Hand-Arm 1
,
Whole-Body 1
) in the
Select Setup
menu.
=>
=>
