60
SV106A User Manual
Position insertion, deletion
The user can delete or insert the position
in the edited text using the
<
>
,
<
>
push-buttons, pressed together with
<Alt>
.
<Al/
>
The edited name is accepted and the instrument returns to the
Save Results
window after pressing
<ENTER>
. Pressing the
<ENTER>
push-button again saves the file in the working directory.
The special warning is displayed if a file with the same edited name already
exists in the memory. The instrument waits then for a reaction from the user
(any push-button should be pressed except
<Shift>
or
<Alt>
).
Note: The files can be overwritten (using of the same file name) without any warning if the Replace
option is switched on (path: <Menu> / File / Save Options).
Saving is not possible when the instrument is measuring the signal. The
message “Measurement in progress!” is displayed for about 3 seconds.
The message “No Results To Save” is displayed after trying to execute the
save command in case when no measurements were performed and there
are no results to be saved. The instrument then waits for the reaction of the
user (any push-button should be pressed except
<Shift>
or
<Alt>
) and after
pressing a push-button it returns to the
Save Results
window.
Note: Direct access to the Save Results window is possible after pressing together the <ENTER>
and <Alt> push-buttons if the Auto Save option is switched off (path: Menu / File / Save Options).
Otherwise (Auto Save option is switched on), the results are saved automatically, after pressing
these push-buttons, in the file with the incremented name number.
7.2 Managing the saved files
– File Manager
The
File Manager
is used for checking the
contents of the memory and performing
commands on result and logger files such
as: open, delete, rename, create new files
or catalogues and displaying file and
catalogue information.
<ENT>
