5
SV106A User Manual
9.2.
Return to the factory settings
– Factory Settings
73
9.3.
Setting the scope of instrument's functions
— Instrument Mode
74
9.4.
Reference signal in vibration measurements - Reference Levels
75
9.5.
User filter setting
– User Filters
75
9.6.
Selection of the Vibration units - Vibration Units
75
9.7.
Warnings selection
– Warnings
76
10.
1/1 AND 1/3 OCTAVE ANALYSER
77
10.1.
Selection of 1/1 Octave or 1/3 Octave analysis mode
77
10.2.
Setting the parameters of 1/1 Octave and 1/3 Octave analysis
77
10.3.
Saving of 1/1 Octave and 1/3
Octave analysis results in the logger’s file - Logger Results
78
10.4.
Selection of 1/1 Octave and 1/3 Octave bandpass results as triggering source
78
10.5.
Display options in 1/1 Octave and 1/3 Octave analysis mode
78
10.6.
Presentation of 1/1 Octave and 1/3 Octave analysis results
79
10.7.
Setting the scale of the spectrum results presentation
– Spectrum Scale
80
10.8.
Setting parameters of the spectrum presentation - Spectrum View
81
10.9.
Selection of channels for presentation
– Multichannel View
82
10.10.
Setting parameters for total values
– Total Values
82
10.11.
Setting user filter coefficients for 1/1 Octave and 1/3 Octave analysis
– User Filters
82
11.
DOSIMETER FUNCTION
84
11.1.
Setting parameters for dose measurements
– HAV/WBV Dosimeter
84
11.2.
Setting parameters for channels
– Channel x
85
11.3.
Dosimeter presentation mode
85
11.4.
Calculation of hand-arm and whole-body daily results
– Calculator
86
12.
MAINTENANCE
89
12.1.
Powering and charging
89
12.2.
Transducers
89
12.3.
Resetting the instrument
90
12.4.
Firmware upgrade
91
12.5.
Storing the instrument
91
12.6.
Transportation and carrying
91
12.7.
Cleaning
91
12.8.
Troubleshooting
91
APPENDIXES
A. REMOTE CONTROL
B. DATA FILE STRUCTURES
C. TECHNICAL SPECIFICATIONS
D. DEFINITIONS AND FORMULAE OF MEASURED VALUES
