21
SV106A User Manual
Automatic saving of Wave files
Wave files contained signal recording data are also saved automatically in
the
SD Card
memory with an extension .WAV. To enable automatic saving
several conditions should be fulfilled:
1. SD card should be inserted and there should be enough space on it.
2.
The wave recording should be switched on (
path: <Menu> /
Measurement / General Settings / Logging Mode: Wave
).
The wave file name is defined automatically using the same rules as for the
logger files. The default prefix for the wave files is
&REC
.
Note:
During the measurement run with wave recording to the wave file the “note” icon is displayed.
Note: The wave files usually are big in size and may use enormous memory space. Since the wave-
file name is not displayed on the result view screen, the user should remember that wave recording
function is active and switch it off always when wave recording is not required.
Saving the setup files
The measurement configuration setup
files can be stored in the
SD Card
memory with an extension .SVT
manually either by means of
<S/P>
push-button
or
by
creating
the
<New File>
in the
Setup Manager
list.
<S/P>
There is no automatic option for the
setup files saving, but the instrument
always generates new setup name
automatically
with
default
prefix
SETxxyy
, where
xx
is a day and
yy
is a
month abbreviation. For example,
23MA
means 23rd of March.
<ENT>
Note: When no micro SD card
is inserted in the card slot, the
file storage is impossible and
after the attempt to manually
save the main results or setup
files the warning will appear on
the screen. Logger and Wave
files saving is also impossible
and Data Logging position
became inactive.
Внимание: Если в приборе отсутствует карта микро
SD
, то при попытке вручную сохранить результаты
прибор выведет сообщение о невозможности такой
операции.
Кроме
этого
невозможно
также
автоматическое сохранение файлов истории и запись
сигнала, поскольку функция История блокируется.
