Suzuki SWIFT 2022 Series Owner'S Manual Download Page 309

Page: 309 / 622

3-125

OPERATING YOUR VEHICLE

80SS5-01E

Warning and indicator messages

If there is a problem or warning regarding the parking sensor system, a message is dis-

played on the information display in the instrument cluster and a symbol blinks. If a mes-

sage is displayed, follow its instruction.

Message

Symbol

Probable cause and remedy

Two blinking lines in

a sensor location.

There may be a problem with the parking

sensor system.

Have your vehicle inspected by an autho-

rized SUZUKI dealer.

One blinking line in

a sensor location.

The indicated sensor is contaminated.

Wipe it clean with a soft cloth.

Rearview camera
(if equipped)

When the gearshift lever is shifted to “R”

position while the ignition switch is in “ON”

position or the ignition mode is ON, the

rearview camera system automatically

shows the view behind the vehicle on the

display.

WARNING

The distance viewed in the rearview

camera may differ from the actual

distance according to the condition

of road or the load the vehicle is car-

rying. Since the camera display area

is also limited, backing up by only

looking at the display may cause an

accident or a collision with an object.

The rearview camera cannot replace

the driver’s attention. The driver

alone is responsible for parking and

similar driving maneuvers.

• Use the rearview camera only to

provide driving assistance.

• Always drive carefully confirming

the safety of the rear and the sur-

rounding conditions by looking

directly with your eyes and using

the rear view mirror.

• Check that the tailgate is securely

closed when backing up.

Summary of Contents for SWIFT 2022 Series















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SWIFT 2022 Series

Reviews:

Related manuals for SWIFT 2022 Series

Brands by name

Popular brands

Suzuki SWIFT 2022 Series, Owner'S Manual

Search results

Summary of Contents for SWIFT 2022 Series

Reviews:

Related manuals for SWIFT 2022 Series

Brands by name

Popular brands