Suzuki SWIFT 2022 Series, Owner'S Manual

Page: 266 / 622

3-82
OPERATING YOUR VEHICLE
80SS5-01E
Under the situations other than described
above, the dual sensor cannot detect the
vehicle in front of you or light source, and
there is a case where high beam assist
may not activate properly.
Refer to “Situations where the dual sensor
may not activate properly” in this section
for details.
Under the following situations, switch
high beam or low beam manually.
• When switching between the high
beams (main beams) and low beams
frequently
• When there is a problem using the high
beams (main beams)
• When automatic high beam operation
seems to disturb other drivers or pedes-
trians
There is a case that high beams (main
beams) are switched to low beams by the
fog lights of the vehicle in front of you.
Street lights, traffic signals, and illumina-
tion of billboards or signs may cause the
high beams (main beams) to switch to the
low beams, or low beam to remain on.
Dual sensor brake support OFF
switch
You can turn off the dual sensor brake sup-
port system.
• Under the following situations, push and
hold the dual sensor brake support OFF
switch as the dual sensor brake support
system may activate unexpectedly.
– When the vehicle is placed upon a tes-
ter such as when undergoing a vehicle
inspection
– When the vehicle is placed upon a lift,
and the tyres are idling
– When the vehicle is being towed
– When the vehicle is being carried on a
car carrier
– When the vehicle is being driven on a
race track
– When there is vinyl curtains or pendu-
lous branches in front of the vehicle
– When driving in the field covered with
grown grass
– When using an automatic car washer
– When the vehicle is placed upon a car
elevator or placed in a mechanical
parking lot
– When a spare tyre or snow chains are
equipped
– When you repair a flat tyre temporarily
– When your vehicle have an accident
or breakdown
– When the automatic brake system
activates frequently
– When tyres are not inflated to the rec-
ommended tyre pressure
– When tyres are worn
– When non-specified sized tyres or
wheels are equipped
– When a suspension is modified
– When attaching an item which inter-
feres with the visibility of the dual sen-
sor
– When the vehicle is being weighed
down by heavy items
– When the vehicle is used to tow a
trailer
80SM010
• When you want to turn off the system,
push and hold the dual sensor brake
support OFF switch (1) until the interior
buzzer beeps and the dual sensor brake
support OFF indicator light (2) comes
on.
Perform the following operations to turn
the system back on.
(2)
(1)