Suzuki SWIFT 2022 Series, Owner'S Manual

Page: 102 / 622

2-82
BEFORE DRIVING
80SS5-01E
NOTE:
• If you refuel when the ignition switch is in
“ON” position or the ignition mode is ON,
the driving range may not indicate the
correct value.
• When you reconnect the negative (–)
terminal to the lead-acid battery, the
value of driving range will be shown after
driving for a period of time.
Average speed
If you selected average speed the last time
you drove the vehicle, the display indicates
the last value of average speed from previ-
ous driving when the ignition switch is
turned to “ON” position or the engine
switch is pressed to change the ignition
mode to ON. Unless you reset the value of
average speed, the display indicates the
value of average speed which includes
average speed during previous driving.
To reset the value of average speed, push
and hold the indicator selector knob (3) for
a while when the display indicates an aver-
age speed. The display shows “---” and
then indicates a new average speed after
driving for a short time.
NOTE:
When you reconnect the negative (–) ter-
minal to the lead-acid battery, the value of
average speed will be shown after driving
for a period of time.
Driving time
The display shows the total amount of driv-
ing time since the indication was reset.
• To reset the driving time, push and hold
the indicator selector knob (3) for a while
when the display shows the driving time.
NOTE:
• When you reset the indication or recon-
nect the negative (–) terminal to the
lead-acid battery, the driving time will be
shown after driving for a while.
• The indicated maximum value of driving
time is 99:59:59. No more than the maxi-
mum value will be indicated on the dis-
play until you reset the driving time.
Total idling stop time (if equipped)
The display shows the total length (in
hours, minutes and seconds) of engine
stopping time by ENG A-STOP system
since the indication was reset.
• To reset the total idling stop time, push
and hold the indicator selector knob (3)
for a while when the display shows the
total idling stop time.
NOTE:
• The indicated maximum value of the total
idling stop time is 99:59:59.
• When you reconnect the negative (–)
terminal to the lead-acid battery, the
value of the total idling stop time will be
reset.
Total idling fuel saved (if equipped)
The display shows the total amount (in mil-
liliters) of fuel conservation by ENG A-
STOP system since the indication was
reset.
• To reset the total idling fuel saved, push
and hold the indicator selector knob (3)
for a while when the display shows the
total idling fuel saved.
NOTE:
When you reconnect the negative (–) ter-
minal to the lead-acid battery, the value of
the total idling fuel saved will be reset.
Energy flow indicator (if equipped)
Refer to “ENG A-STOP system (engine
auto stop start system) (for K12C engine
model and K12D engine model)” in
“OPERATING YOUR VEHICLE” section.
Vehicle speed
Vehicle speed is shown.
You can change the unit of velocity that
vehicle speed is displayed in. Refer to
“Setting mode” in this section.
NOTE:
Displayed vehicle speed may differ a little
from the speed meter indication.