Suzuki SWIFT 2022 Series, Owner'S Manual

Page: 199 / 622

3-15
OPERATING YOUR VEHICLE
80SS5-01E
Stopping engine
Starting / stopping engine
(vehicle with keyless push
start system) (if equipped)
Starting engine
52RM202
1) Check that the parking brake is set fully.
2) Turn off such loads as the headlights
and air conditioning system to facilitate
starting of the engine.
3) Manual transmission vehicles:
Shift into “N” (Neutral). Hold the clutch
pedal and brake pedal fully depressed.
Automatic transmission or CVT vehi-
cles:
If the gearshift lever is not in “P” (Park)
position, shift into “P” (Park). Hold the
brake pedal fully depressed.
4) The “PUSH START SWITCH” message
will appear in the information display in
the instrument cluster.
82K254
5) With your foot taken off the accelerator
pedal, push the engine switch (1).
When the engine is started, the starter
motor will automatically stop.
• Even if you fail to start the engine,
the starter motor will stop turning
automatically after approximately 12
seconds. In this case, press the
engine switch to select LOCK (OFF)
mode and restart the engine.
WARNING
Except in cases of emergency, do not
stop the engine while the vehicle is in
motion. If you stop the engine while
the vehicle is in motion, the steering
wheel will lock and you will not be
able to steer the vehicle. This may
result in an accident. Avoid stopping
the engine while driving.
NOTICE
• Automatic transmission or CVT
vehicles:
If you stop the engine while the
vehicle is in motion, the automatic
transmission or CVT may be dam-
aged. Avoid stopping the engine
while driving.
• Vehicles equipped with the engine
with turbocharger:
When stopping the engine after
climbing or high speed driving, let
the engine idle for about one min-
ute or more (if it is not prohibited)
to cool down the turbocharger and
engine oil. This is to prevent the
engine oil from over-deteriorating.
Deteriorated engine oil will damage
the bearings of the turbocharger.
MT
AT
CVT
(1)