Suzuki SWIFT 2022 Series, Owner'S Manual

Page: 168 / 622

2-148
BEFORE DRIVING
80SS5-01E
To cancel the function:
Perform any of the following operations.
• Pull the lighting control lever toward you
once.
• Turn the ignition switch to “ACC” or “ON”
position or change the ignition mode to
ACC or ON by pressing the engine
switch.
• Turn the lighting switch to any other
position than “AUTO” position.
NOTE:
• When the “To home” is functioning, the
front fog lights (if equipped), rear fog
light (if equipped) and the headlights
(high beam) are not turned on.
• Lighting time of the “To home” function
can be changed on the information dis-
play. Refer to “Information display” in this
section.
“To car” function
Before you get in the vehicle, the ground
will be illuminated for a short while to easily
lead the driver to the vehicle. If UNLOCK
button of the keyless push start system
remote controller is pressed while the light-
ing switch is positioned in “AUTO”, the
front position lights and the headlights in
the low beam are turned on for 10 sec-
onds.
This function will operate only when it is
dark outside the vehicle.
To cancel the function:
Perform any of the following operations.
• Lock the doors by using the keyless
push start system remote controller, the
request switch or the key in the driver’s
door lock.
• Change the ignition mode to ACC or ON
by pressing the engine switch.
• Turn the ignition switch to “ACC” or “ON”
position or change the ignition mode to
ACC or ON by pressing the engine
switch.
NOTE:
• When the “To car” is functioning, the
front fog lights (if equipped), rear fog
light (if equipped) and the headlights
(high beam) are not turned on.
• Lighting time of the “To car” function can
be changed on the information display.
Refer to “Information display” in this sec-
tion.
Front fog light switch
(if equipped)
68PM00232
To turn the front fog light on, twist the knob
as shown in the illustration with the posi-
tion lights, tail lights and/or the headlights
are on. When the front fog light is on, an
indicator light on the instrument cluster will
come on.
NOTE:
In some countries the lighting operation
may be different from the above descrip-
tion according to local regulations.
EXAMPLE