Suzuki SWIFT 2022 Series Owner'S Manual Download Page 260

Page: 260 / 622

3-76

OPERATING YOUR VEHICLE

80SS5-01E

54P000330

• When you pass by an oncoming vehicle

on a curvy road

54P000332

• When there is a roadside guard rail, or

sign on a curve

• When you pass by an oncoming vehicle

that is stopped to make a right/left turn

• When you pass by an oncoming vehicle

when you turn to the right / left

• When the posture of the vehicle is

changing by an undulated and uneven

road surface

• When there is objects protruding from

the road’s surface, manhole covers,

signs and other metal objects, as well as

falling objects or level changes in the

road

• When there is a parking lot gates, toll

gates, railroad crossing gates or sign-

boards in the direction of travel.

• When driving in the field covered with

grown grass

• When the posture of the vehicle is

changing

• When the mounting position of the dual

sensor is shifted by strong impact

• When you pass under an object (grade

separation, road sign, billboard, street

lamp, etc.) at the top of an uphill road

• When there are paint or patterns on the

road or the wall that may be indistin-

guishable from a vehicle

Frontal collision warning

Under the following situations, there is a

risk of a frontal collision and a warning will

work.

• When you are operating at speeds

between approximately 15 km/h and 140

km/h (9 mph to 87 mph). (For pedes-

trian, operating speed is between

approximately 15 km/h and 60 km/h (9

mph to 37 mph).)

• The relative speed between your vehicle

and the vehicle or pedestrian ahead is

approximately 15 km/h (9 mph) or more.

The interior buzzer will intermittently beep

and the indication on the information dis-

play will appear.

53SB3075

When the frontal collision warning sounds,

depending on the distance from the vehicle

in front of you and driving conditions, take

evasive action with the steering wheel or

brake pedal.

EXAMPLE

Information

display

Summary of Contents for SWIFT 2022 Series















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SWIFT 2022 Series

Reviews:

Related manuals for SWIFT 2022 Series

Brands by name

Popular brands

Suzuki SWIFT 2022 Series, Owner'S Manual

Search results

Summary of Contents for SWIFT 2022 Series

Reviews:

Related manuals for SWIFT 2022 Series

Brands by name

Popular brands