Suzuki SWIFT 2022 Series Owner'S Manual Download Page 236

Page: 236 / 622

3-52

OPERATING YOUR VEHICLE

80SS5-01E

Information message

Cause and remedy

52RM30670

The engine restarted automatically because one of the following automatic engine

restart conditions is met.

• The defroster is turned on.

• The driver’s seat belt is released.

• The driver’s door is opened.

• The vehicle is started to move on a slope, etc.

52RM30680

The engine shut down because one of the following operations is performed during

the automatic engine stop.

• The hood is opened.

• For Manual transmission vehicle, the driver’s door is opened with the driver’s seat

belt is unfastened.

Restart the engine by usual operation. Refer to “Starting / stopping engine (vehicle

without keyless push start system) (if equipped)” or “Starting / stopping engine

(vehicle with keyless push start system) (if equipped)” in this section for details.

Manual transmission

52RM30690

The gearshift lever is shifted to a position other than “N” (Neutral) position without

depressing the clutch pedal during the automatic engine stop.

To restart the engine, place the gearshift lever in “N” (Neutral) position and depress

the clutch pedal.

Summary of Contents for SWIFT 2022 Series















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SWIFT 2022 Series

Reviews:

Related manuals for SWIFT 2022 Series

Brands by name

Popular brands

Suzuki SWIFT 2022 Series, Owner'S Manual

Search results

Summary of Contents for SWIFT 2022 Series

Reviews:

Related manuals for SWIFT 2022 Series

Brands by name

Popular brands