Suzuki SWIFT 2022 Series, Owner'S Manual

Page: 255 / 622

3-71
OPERATING YOUR VEHICLE
80SS5-01E
Changing speed setting
Setting to the current speed
1) Push “CANCEL” switch (2).
2) Accelerate or decelerate to the desired
speed.
3) Pull down the “RES +/SET –” switch (3)
and turn on “SET” indicator (5). The
current vehicle speed is set as the max-
imum speed.
Using “RES +/SET –” switch
To change to a faster speed, press repeat-
edly or hold pulling up the “RES +/SET –”
switch (3).
To change to a slower speed, press
repeatedly or hold pulling down the “RES
+/SET –” switch (3).
NOTE:
• You can adjust the set speed by 1 km/h
(or 1 mph) by pulling up and down “RES
+/SET – ” switch (3) quickly.
• You can adjust the set speed by 5 km/h
(or 5 mph) by pulling up and down and
holding “RES +/SET – ” switch (3).
(e.g. 62 Km/h (or 42 mph) > 65 Km/h (or
45 mph) > 70 Km/h (or 50 mph), etc)
• If the current vehicle speed exceeds the
maximum speed when changing to the
slower speed using “RES +/SET – ”
switch (3), the speed indication (6) will
flash and the buzzer will sound.
Cancelling speed limiter
• To cancel the speed limiter, push “CAN-
CEL” switch (2). The “SET” indicator (5)
will go off.
• To resume the previously set speed, pull
up the “RES +/SET –” switch (3) and
turn on the “SET” indicator (5).
To turn off the speed limiter system, push
“LIMIT” switch (1) and check that limit indi-
cator (4) is off.
Also, you can turn off the speed limiter by
turning off the engine.
NOTE:
If you turn off the speed limiter system, the
previously set speed in the memory is
cleared. Set your speed again.
SUZUKI SAFETY SUPPORT
(if equipped)
Dual sensor brake support system
(if equipped)
Dual sensor brake support is a system that
detects a vehicle or a pedestrian in front of
your vehicle by the dual sensor, attempts
to avoid a collision by giving warning to the
driver, and attempts to reduce damage in
the event of a collision.
WARNING
• Dual sensor brake support has lim-
its and may not function properly
depending on the driving condi-
tions. Do not rely excessively on
the system and always drive in a
safe manner.
• For safety reasons, do not check
the operation of the system by
yourself.
• Check that all passengers fasten
their seat belts when the vehicle is
being operated.
When the system is activated, there
is a risk of serious injury from
being thrown.