Suzuki GSX1300BKA, Supplementary Service Manual

Page: 77 / 108

ABS: 4E-42
1 5) Check for continuity between “16” terminal and “5”
terminal at the ABS control unit coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity (
)
ABS control unit coupler (Harness end)
Is there continuity between “16” and “5” ?
• Inspect the wire
harness. (Faulty
sensor wire)
• Faulty front wheel
speed sensor. Refer
to “Rear Wheel
Speed Sensor
Removal and
Installation
(GSX1300BKAK8)
(Page 4E-10)”.
Go to Step 2.
2 1) Measure the resistance between “16” (W/R) and ground
at the ABS control unit coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Resistance (
Ω
)
Normal value (“16” – Ground)
∞ Ω
(Infinity)
ABS control unit coupler (Harness end)
Is the resistance between “16” and ground OK?
Go to Step 4. Go to Step 3.
Step Action Yes No
(B)
(A)
I823H3450039-03
(A)
(B)
I823H3450070-02