Suzuki GSX1300BKA, Supplementary Service Manual

Page: 85 / 108

ABS: 4E-50
5 1) Disconnect the rear wheel speed sensor coupler.
2) Measure the resistance between “B” (B) and ground at
the rear wheel speed sensor coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (
Ω
)
Normal value (“B” – Ground)
∞ Ω
(Infinity)
Is the resistance between “B” and ground OK?
Inspect the wire
harness. (Faulty B/Y
wire) Replace the rear wheel
speed sensor. Refer to
“Rear Wheel Speed
Sensor Removal and
Installation
(GSX1300BKAK8)
(Page 4E-10)”.
6 1) Disconnect the rear wheel speed sensor coupler.
2) Check for continuity between “7” (W/Y) on the ABS
control unit coupler and “C” (W/Y) on the rear wheel
speed sensor coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity test (
)
Normal value (“7” – “C”)
Continuity (
)
ABS control unit coupler (Harness end)
Is there continuity between “7” and “C”?
Go to Step 7. Inspect the wire
harness. (Faulty W/Y
wire)
Step Action Yes No
Sensor side
(A)
“B”
I823H3450051-02
?
Harness side
(B)
(A)
“C”
I823H3450052-02