Suzuki GSX1300BKA, Supplementary Service Manual

Page: 103 / 108

Wiring Systems: 9A-5
Wiring Harness Routing Diagram (GSX1300BKAK8)
B823H39102004
1
2
3
5
6
“A”
6
7
8
6
“C”
9
“B”
4
16
11
13
12
14
15
10
I823H3910901-08
1. Wiring harness protector
: Stick the wiring harness protector onto the seat rail bolt.
11. Speed sensor lead
2. Clamp
: Bind the front brake pipe, speed sensor lead wire, oil pressure switch lead
wire and HO2 sensor lead wire with the clamp.
12. Oil pressure switch lead
3. Clamp
: Bind the wiring harness, ABS sensor lead wire and rear brake light switch
lead wire with the clamp.
13. HO2 sensor lead
4. Clamp
: Bind the wiring harness and ISC valve lead wire with rib of the throttle body
at white taping point.
14. ABS sensor lead
5. Wiring harness No. 2 15. Rear brake light switch lead
6. Fixed clamp 16. ABS control unit
7. Starter motor lead wire “A”: Set the clamp between the headlight and headlight housing.
8. Battery (–) lead wire “B”: Turn the coupler side of the #1 ignition coil/plug cap to the left.
9. CMP sensor “C”: Route the CMP sensor lead wire above the wiring harness.
10. Clamp
: Bind the wiring harness No. 2 with the clamp at the blue taping. Be careful
not to contact the wiring harness with the end of the screw.