Suzuki GSX1300BKA, Supplementary Service Manual

Page: 39 / 108

ABS: 4E-4
Self-diagnosis Function and ABS Indicator
Light Description (GSX1300BKAK8)
B823H34501006
The ABS control unit performs the self-diagnosis and
can store any electronically detected malfunctions as
diagnostic trouble codes. If a malfunction has occurred,
the indicator light lights up to inform the rider of the
malfunction. The special tool, when connected to the
mode select coupler, enables the ABS indicator light to
display the diagnostic trouble codes.
ABS Indicator Light
The ABS indicator light informs the rider of any ABS
malfunctions. If a malfunction occurred, the ABS
indicator light flashes, during the self-diagnosis, to
indicate the diagnostic trouble code so that the correct
part can be repaired.
• When the ignition switch is turned to ON, the ABS
indicator light lights up even if no malfunction has
occurred, to indicate that the bulb is not burnt out. It
will go off after the motorcycle is ridden at more than 5
km/h (3.1 mile/h).
• If an ABS malfunction has occurred, the ABS indicator
light keeps lighting up.
NOTE
When a malfunction has occurred in the ABS,
connect the special tool to the mode select
coupler to display the diagnostic trouble
code on the ABS indicator light. Refer to
“DTC (Diagnostic Trouble Code) Output
(GSX1300BKAK8) (Page 4E-23)”.
Special tool
(A): 09930–82710 (Mode select switch)
ABS Operation and ABS Indicator Light
The ABS indicator light shows the ABS operating condition. During normal operation, the ABS indicator light lights up
when the ignition switch is turned to ON and goes off after the motorcycle is ridden at more than 5 km/h (3.1 mile/h). If
a malfunction has occurred, the ABS indicator light keeps lighting up.
3
2
4
5
6
7
8
9
10
11
12
1 0 x1000r/min
km/h
I823H3450008-01
(A)
I823H3450009-01
The ABS indicator light goes off when the motorcycle is
ridden at more than 5 km/h (3.1 mile/h). The ABS is normally activated.
The ABS indicator light keeps lighting up even though the
motorcycle is ridden at more than 5 km/h (3.1 mile/h). One or more malfunction has been found and ABS
activation been hanged up.
The ABS indicator light does not light up when turning the
ignition switch ON. Check the wire harness and combination meter. Refer to
“ABS Indicator Light Inspection (GSX1300BKAK8)
(Page 4E-19)”.
3
2
4
5
6
7
8
9
10
11
12
1 0 x1000r/min
km/h
I823H3450008-01