Suzuki GSX1300BKA, Supplementary Service Manual

Page: 60 / 108

4E-25 ABS:
3) Read the DTC (Diagnostic Trouble Code) and show
data when trouble (displaying data at the time of
DTC) according to instructions displayed on SDS.
NOTE
• Not only is SDS used for detecting
Diagnostic Trouble Codes but also for
reproducing and checking on screen the
failure condition as described by
customers using the trigger.
• How to use trigger. (Refer to the SDS
operation manual for further details.)
4) Close the SDS tool and turn the ignition switch OFF.
5) Reinstall the right frame cover.
DTC (Diagnostic Trouble Code) Deleting
(GSX1300BKAK8)
B823H34504022
Use of Mode Select Switch
NOTE
• The previous malfunction history code
(Past DTC) still remains stored in the ABS
HU. Therefore, erase the history code
memorized in the ABS HU using SDS tool.
• The DTC is memorized in the ABS HU also
when the wire coupler of any sensor is
disconnected. Therefore, when a wire
coupler has been disconnected at the time
of diagnosis, erase the stored malfunction
history code using SDS.
1) Remove the front seat. Refer to “Exterior Parts
Removal and Installation in Section 9D in related
manual”.
2) Connect the special tool to the mode select coupler
(1) and output the DTCs.
Special tool
(A): 09930–82710 (Mode select switch)
(A)
(B)
I705H1110116-03
(A)
I823H3450009-01
1
I823H3450027-03