Adjustments
Technical Handbook
019722-101 Rev. 05
71
SC-350/360
11 Adjustments
Note!
It is important that all mechanical functions are adjusted correctly to
enable proper functionality of the machine.
The parts described in this section must be adjusted
together and in
the order
they appear.
When all adjustments have been completed, replace the covers and
test run the machine.
11.1 Coin Disc
The coin disc should be in level with the coin track or not more than
0.1 mm above it.
a) Remove the coin disc, see
“Coin Disc Drive - Removal” on page
b) If needed level up the coin disc with shims (1).
1 Shim
1
