![background image](http://html1.mh-extra.com/html/suzohapp/arpege-security-sc-350/arpege-security-sc-350_technical-handbook_1408249022.webp)
Installation
Technical Handbook
019722-101 Rev. 05
12
SC-350/360
4
Installation
4.1 Installation Requirements
a) The machine must be placed on a stable horizontal surface.
b) Ensure that the environmental requirements are met when
installing the machine, see
.
c) Do not place the machine close to any radiators.
d) Do not place the machine in direct sunlight as reflections from
the sunlight will make it impossible to read messages displayed
on the screen and may also cause the internal temperature of the
machine to rise above an acceptable level.
e) Allow some free space around the machine to enable the air to
circulate.
WARNING!
Risk of electroshock
The machine is of partly metal construction and must therefore
always be earthed to the supply. Ensure that the plug on the supply
lead is earthed and that the supply source is earthed. This is a
requirement for this type of equipment and if not adhered to will
contravene the international standards of Health and Safety in the
work place.
Although this machine has been tested for electromagnetic
compatibility and vibration characteristics, it is recommended that
no equipment which generates a high level of electromagnetic
interference (EMI) or vibration is placed close to this machine.
Caution!
The machine must be protected by a fuse or a circuit breaker in the
power supply feed.
For AC voltage input, see