Suzohapp ARPEGE SECURITY SC-350, Technical Handbook

Page: 12 / 114

General Information
Technical Handbook 019722-101 Rev. 05
2
SC-350/360
1.4 Responsibility
The supplier of the equipment accepts no responsibility for injury or
damage to personnel or equipment, if the equipment is altered in any
way or used in a manner for which it was not intended at the time of
delivery.
If the conditions for use of the equipment are changed, the supplier
must be contacted or the declaration of conformity is invalidated.
1.5 About this Document
This technical handbook is valid for SC-350 and SC-360.
It provides information required by qualified personnel to carry out
repairs, maintenance and servicing.
Throughout this manual the instructions given apply to both
machines unless otherwise stated.
1.6 Revision History
1.7 Abbreviations/Acronyms
Revision Major Changes
05 Template updated.
Coin diameter and thickness ranges corrected.
04 Added new logos for SUZOHAPP and SCAN COIN on the
front page and changed from SCAN COIN AB to SUZOHAPP
on page 1.
03 Coin diameter range changed to 37.5 mm
5.3 “Functional” on page 13
Updated 3.7 “Accessories and Options” on page 10
02 Updated with new PSU board and Declaration of Conformity.
01 Added WEEE directive. Template updated.
Abbreviation Description
AC Alternating Current
AUX Auxiliary
BDO Bag Draw-Off
CPU Central Processing Unit
DC Direct Current
DMM Digital Multi Meter
ESD Electrostatic Discharge
LED Light Emitting Diode
PSU Power Supply Unit