Disassembly and Assembly
Technical Handbook
019722-101 Rev. 05
55
SC-350/360
8.16 Thickness Guide Plate - Removal
Note!
Refer to fig. above.
a) Open the inspection cover.
b) Raise the thickness guide block (2).
c) Remove the three screws (1).
d) Remove the guide plate (3).
8.17 Motor - Removal
a) Remove the top cover and the bottom cover, see
.
b) Turn the machine upside down.
c) Disconnect the cable (1) from the mains power supply box.
d) Remove the belt (2).
e) Remove the four screws (3).
f) Remove the motor (4) and the bracket (5).
Equipment required
10 mm block key
PH Screwdriver
1 Cable
2 Motor
3 Screw (4 pcs)
4 Bracket
5 Belt
1
2
3
4
5
