Adjustments
Technical Handbook
019722-101 Rev. 05
73
SC-350/360
Thickness guide block - Parallelism
Adjusting the thickness guide block so that it is parallel to the coin
disc. The thickness guide block locks into an eccentric nipple (2), and
by turning this nipple the gap between the guide block and the coin
disc can be adjusted.
a) Open the inspection cover.
b) Raise the thickness guide block arm.
c) Loosen the lock nut (1) and turn the eccentric nipple in desired
direction to adjust the gap (3) between the guide block and the
coin disc.
d) Tighten the lock nut.
e) Lower the thickness guide block and test with a coin if the
gap (3) to the coin disc is parallel to the guide block.
If not repeat steps a) - c).
1 Lock nut
2 Eccentric nipple
3 Gap
3
2
1
