45
9.2.3.3
SNMP
The SNMP (Simple Network Management Protocol) setting can be found under
this path:
System> Network> SNMP
.
With Simple Network Management Protocol (SNMP) support, the camera can
be monitored and managed remotely by the network management system.
SNMP v1 / v2
Enable SNMP v1 / v2
Select the version of SNMP to use by checking the box.
Read Community
Specify the community name that has read-only access to all supported
SNMP objects.
The default value is “public”.
Write Community
Specify the community name that has read / write access to all
supported SNMP objects (except read-only objects). The default value is
“private”.
SNMP v3
SNMP v3 supports an enhanced security system that provides protection
against unauthorized users and ensures the privacy of the messages. Users will
be requested to enter security name, authentication password and encryption
password while setting the camera connections in the network management
system. With SNMP v3, the messages sent between the cameras and the
network management system will be encrypted to ensure privacy.
Enable SNMP v3
Enable SNMP v3 by checking the box.
Security Name
The maximum length of the security name is 32 characters.
NOTE:
The valid characters are A-Z, a-z, 0-9 and !#$%&
‟-.@^_~.
Authentication Type
There are two authentication types available: MD5 and SHA. Select
<SHA> for a higher security level.
