79
9.2.11 Schedule
The Schedule setting can be found under this path:
System> Schedule
.
This function allows users to setup schedules for features including: <Alarm
Switch>, <Motion Detection> and <Network Failure Detection>. The function
supports up to 10 sets of time frames in the time frame list.
Setting Schedules
Step 1.
Select a time frame from the time frame list.
Step 2.
Check the weekday boxes below to choose the specific weekdays.
Step 3.
Select a time mode, Day, Night or Time. Under Time mode, specify the
start time (hour:minute) and the time duration (hour:minute) to activate
the schedule triggered features. The setting range for the time duration
is from 00:00 to 168:59.
Step 4.
Click on <Save> to save the setup. Alternatively, click on <Delete> to
delete a chosen time frame.
Time Mode
Day / Night
The camera profile will be loaded when IR cut filter is on / off.
Time
This indicates the start time and the time duration for the schedule.
NOTE:
Users
MUST
select <By schedule> under each feature setting
page to enable the schedule function.