Surveon CAM6471LZ User Manual Download Page 87

Page: 87 / 116

9.3.1

Video Format (Video Resolution and Rotate Type)

The Video Format setting can be found under this path:

Streaming> Video

Format

Video Resolution

Under Video Resolution section, the available video resolution formats include

MJPEG, H.265 and H.264. Please refer to

Appendix D: Video Resolution

for

more combination details.

Click on <Save> to confirm the setting.

Text Overlay Settings

Users can select the items to display data, including date / time / text on the live

video pane.



Include date/time

Check the box to enable date, time, or date & time display on the Live

Video Pane and decide the string align position from the drop-down list.



Include text string

Check the box to enable text string display on the Live Video Pane and

decide the string align position from the drop-down list. The maximum

length of the text string is 15 alphanumeric characters.



Include subtitle

Check the box to enable subtitle display on the Live Video Pane. Users

can set at most 5 subtitles, and the maximum length of each subtitle is

16 alphanumeric characters.



Include azimuth

Check the box to enable azimuth display on the Live Video Pane and

decide the azimuth alignment position from the drop-down list.

Click on <Save> to confirm the Text Overlay setting.

Summary of Contents for CAM6471LZ





















































































































Search results

Summary of Contents for CAM6471LZ

Reviews:

Surveon CAM6471LZ, User Manual, Page: 87 / 116

Search results

Summary of Contents for CAM6471LZ

Reviews: