56
When motion is detected, the signals will be displayed on the Motion window as
shown below. Motion is detected by comparing sampling pixels in the detection
area of two consecutive live images.
Motion Detection
In each set of Motion Detection Setting, the default setting for the Motion
Detection function is <Off>. Enable the function by selecting <On>
.
Users can
also activate the function according to the schedule previously set in the
<Schedule> setting page. Select <By schedule> and click <Please select…> to
choose the desired schedule from the drop-down menu.
Motion Detection Setting
Users could adjust various parameters of Motion Detection in this section.
Sampling pixel interval [1-10]:
This item is used to examine the differences between two frames. Users
can configure the interval of sampling pixel. The default value is 1. For
instance, if users set the interval as 3, IP camera system will take one
sampling pixel from every 3 pixels of each row and each column in
detection area (refer to the figure below). The alarm will be triggered
when differences are detected.
