Surveon CAM6471LZ User Manual Download Page 22

Page: 22 / 116

Configuration Files Export / Import

To export / import configuration files, users can access the Maintenance page

on the user-friendly browser-based configuration interface.

The Maintenance setting can be found under this path:

System> Maintenance

Users can export configuration files to a specified location and retrieve data by

uploading an existing configuration file to the camera. It is especially convenient

to make multiple cameras having the same configuration.

Export

Users can save the system settings by exporting the configuration file (.bin) to a

specified location for future use. Click on the <Export> button, and the popup

File Download window will come out. Click on <Save> and specify a desired

location for saving the configuration file.

Upload

To upload a configuration file to the camera, click on <Browse> to select the

configuration file, and then click on the <Upload> button for uploading.

Summary of Contents for CAM6471LZ





















































































































Search results

Summary of Contents for CAM6471LZ

Reviews:

Related manuals for CAM6471LZ

Brands by name

Popular brands

Surveon CAM6471LZ, User Manual

Search results

Summary of Contents for CAM6471LZ

Reviews:

Related manuals for CAM6471LZ

Brands by name

Popular brands