SUPREME BioStaion T2, User Manual

Page: 71 / 88

BioStation T2 User Guide
4 Admin Menu
70
-
Template Card: User information including user ID and
other identification information is saved in the card. When a
card is placed close to the card sensor by the terminal, the
terminal then reads the user information from the card for
identification purposes.
5
Server Matching: Set to use Server Matching or not. If Server
Matching is selected, authentication is based on the user data
saved in the server, instead of in the terminal. If connection to the
server is disconnected, authentication is based on the user data
saved in the terminal without making any additional changes to the
configuration. Server matching works only with BioStar SE
(Standard Edition). Please refer to BioStar user guide for detail.
6
Match Timeout (5/10/15/20/25/30): Sets up the waiting time for
Server Matching and Face Detection. In case there is no answer
from the server during Matching Time or the face cannot be
detected, the authentication will fail.
7
Individual Auth: Sets whether or not to use the Individual
Authentication mode. You can set authentication mode by
individual user. Individual authentication mode for the user is prior
to the authentication mode for the terminal.
■
T&A Mode
Set up the T&A mode to apply to the terminal.
1
Select [Menu] > [Mode] > [T&A Mode].
2
Press [T&A Mode] to set the mode.
(Disabled/Manual/Auto/Manual Fix/Fixed)
Note
For more details on the T&A mode,
see [Chapter 3. User Menu >2. T&A Mode > T&A Mode
Setup (p.46)].