SUPREME BioStaion T2, User Manual

Page: 65 / 88

BioStation T2 User Guide
4 Admin Menu
64
Network Setup
Set the network connection of BioStation T2. There are two
network connections: direct connection that a BioStar client
connects to a terminal and server connection that a terminal
connects to the BioStar server.
■
TCP/IP Setup
Set up TCP/IP for connecting the terminal and BioStar.
1
Select [Menu] > [Network] > [TCP/IP].
2
LAN Type: Select the LAN type to be used for TCP/IP
connection. (Values: Disabled/Ethernet/Wireless LAN)
3
Port: Assigns the TCP/IP port for the terminal. The default
value is ‘1470’.
4
Max Conn: Sets the number of BioStar software that can be
connected simultaneously. (Values: 1/4/8/16)
5
DHCP: Sets whether or not to use DHCP protocol.
6
IP Address: Enter the IP address when a fixed IP is used
instead of DHCP protocol. If you don't know the IP address,
please ask your network administrator.
7
Gateway: Enter the gateway address when a fixed IP is used
instead of DHCP protocol. If you don't know the gateway
address, please ask your network administrator.
8
Subnet: Enter the subnet mask address when a fixed IP is
used instead of DHCP protocol. If you don't know the subnet
mask address, please ask your network administrator.