SUPREME BioStaion T2, User Manual

Page: 41 / 88

BioStation T2 User Manual
3 User Menu
40
Access
Authentication
BioStation T2 supports three authentication types: fingerprint,
Card(RFID), and ID(PIN). The authentication modes are operated
in accordance with the set time schedule and the time schedule of
each authentication means is not overlapped with the others. Up to
128 of time schedules can be set through BioStar software.
■
Fingerprint
■
Fingerprint Only
<How to Set>
1. [Menu] > [Mode] > [Finger Auth Mode] > [Finger]
2. Select either of Always or the desired time schedule.
<How to Authenticate>
1
Place a finger on the sensor.
2
An authentication success screen is displayed.
Note
The authentication success screen is then displayed only
when the card authentication has succeeded.
‐ If the user’s picture has been registered: he user’s picture
is then displayed on the authentication success screen.
‐ If the user’s picture has not been registered: The recorded
image is displayed. If the still image log has not been
recorded, the default image is then displayed on the
authentication success screen.
■
Finge Pin Authentication
<How to Set>
1. [Menu] > [Mode] > [Finger Auth Mode] > [Pin]
2. Select either of Always or the desired time schedule.
<How to Authenticate>
1
Place a finger on the sensor.
2
A PIN number input window appears.
Enter the password(PIN number) and then press [OK].
3
An authentication success screen is displayed.