SUPREME BioStaion T2, User Manual

Page: 70 / 88

BioStation T2 User Guide
4 Admin Menu
69
■
ID Auth Mode
1
Select [Menu] > [Mode] > [ID Auth Mode].
2
ID + Pin: Authenticated by entering the ID and then the password.
3
ID + Finger: Authenticated by entering the ID and then the
fingerprint.
4
ID + Finger/Pin: Authenticated by entering the ID and then
entering the password or a fingerprint.
5
ID + Pin: Authenticated by entering the ID, the
fingerprint and then the password.
■
Operation
1
Select [Menu] > [Mode] > [Operation].
2
Face Detection: Set to use Face Detection or not. When face
detection is checked, authentication is successfully made only
when face detection is succeeded after card or password
authentication.
3
Dual Authentication: Set the Dual authentication mode. Dual
Authentication needs consecutive authentications from two
different users for high security. If the second authentication is not
made within 15 seconds from the first authentication, the first
authentication will become invalid and you have to do dual
authentication again.
4
Card Mode: Set the card type used on the terminal. (Values: Not
Used/Use CSN/Use Template Card) The EM model supports CSN
card authentication mode only.
-
CSN: A terminal reads the unique Card Serial Number
(CSN) given to a card and then saves the number. When a
card is placed close to the card sensor by the terminal, the
terminal then reads the CSN and compares the CSN to the
CSN saved in the terminal for identification purposes.