Supero SuperWorkstation 5035B-T, User Manual

Page: 74 / 118

7-10
S
uper
W
orkstation 5035B-T User's Manual
CPU.)
Select Enabled to use the Enhanced Intel SpeedStep Technology and allows
the system to automatically adjust processor voltage and core frequency in an
effort to reduce power consumption and heat dissipation. The default setting is
GV1/GV3 . Please refer to Intel’s web site for detailed information.
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Warning : Take Caution when changing the Advanced settings. An incorrect
value, a very high DRAM frequency, or an incorrect DRAM timing may cause
the system to become unstable. When this occurs, reset the setting to the
default setting.
Memory Reclaiming
Select Enable to enable the functionality of Memory Remapping above 4GB. The
settings are Enabled and Disabled.
Default Primary Video Adapter
This feature allows the user to select the video device used by the BIOS during
POST. If set to Auto , PEG and PCI devices will be selected. If set to PEG, PEG
devices will be selected. If set to PCI, PCI devices will be selected.
Azalia Audio
Select Auto to enable Azalia Audio. The settings are Auto and Disabled.
High Precision Event Time
Select Yes to activate the High Precision Event Timer (HPET), which is capable of
producing periodic interrupts at a much higher frequency than a Real-time Clock
(RTC) can in synchronizing multimedia streams, providing smooth playback and
reducing the dependency on other timestamp calculation devices, such as an x86
RDTSC Instruction embedded in a CPU. The High Precision Event Timer is used
to replace the 8254 Programmable Interval Timer. The options for this feature are
Yes and No .
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled, PCI and LPC.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The settings
are Enabled and Disabled.