Supero SuperWorkstation 5035B-T, User Manual

Page: 42 / 118

5-14
S
uper
W
orkstation 5035B-T User's Manual
Reset Connector
The reset header is located on pins 3
and 4 of JF1. Attach the reset switch
on the computer chassis to these
pins. See the table on the right for
pin defi nitions.
Power Button
The connection for the power button
is on pins 1 and 2 of JF1. The chas-
sis power button should be connected
here. See the table on the right for pin
defi nitions.
5-9 Connector Defi nitions
Required Connection
4-pin Auxilliary Power
Pin Defi nitions (J41)
Pins Defi nition
1 and 2 Ground
3 and 4 +12V
ATX Power 24-pin Connector
Pin Defi nitions (JPW1)
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 PW_ON
2 Ground
Auxilliary Power Connector
J41 must also be connected to the
power supply to provide auxilliary
power. See the table at right for pin
defi nitions.
Main ATX Power Supply
Connector
The primary power supply connector
(JPW1) meets the SSI (Superset ATX)
24-pin specifi cation. Refer to the table
on the right for the pin defi nitions of
the ATX 24-pin power connector. You
must also connect the 8-pin (J42) and
4-pin power connectors to your power
supply (see below).
Required Connection
8-pin (+12V) Processor Power
Pin Defi nitions (J42)
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
Processor Power Connector
J42 must also be connected to the
power supply to provide power for the
processors. See the table on the right
for pin defi nitions.