Supero SuperWorkstation 5035B-T, User Manual

Page: 33 / 118

Chapter 5: Advanced Serverboard Setup
5-5
5-5 Installing the Processor and Heat Sink
!
Avoid placing direct pressure to the top of the processor package. Always
remove the power cord fi rst before adding, removing or changing any
hardware components.
Notes
Install the serverboard into the chassis before you install the CPU heat sink
and fan.
The Intel LGA775 processor package contains a CPU fan and heat sink assem-
bly. If you buy a CPU separately, make sure that you use only an Intel-certifi ed
multi-directional heat sink and fan.
Install the serverboard into the chassis before you install the CPU heat sink
and fan.
When purchasing an LGA775 processor or when receiving a motherboard with
an LGA775 processor pre-installed, make sure that the CPU plastic cap is in
place and that none of the CPU pins are bent, otherwise, contact the retailer
immediately.
•
•
•
•
1. Press the socket lever to release the
load plate that covers the CPU socket
from its locking position.
CPU socket (with load plate)
Socket Lever
Load Plate
2. Carefully lift the socket lever up to
open the load plate.
Load Plate
Installing the Processor