Supero SuperWorkstation 5035B-T, User Manual

Page: 12 / 118

1-2
S
uper
W
orkstation 5035B-T User's Manual
1-2 Serverboard Features
At the heart of the SuperWorkstation 5035B-T lies the C2SBX, a single processor
serverboard based on the Intel X38 chipset. Below are the main features of the
C2SBX. (See Figure 1-1 for a block diagram of the X38 chipset).
Processors
The C2SBX supports a single Intel Core
TM
2 Extreme, Quad or Dual processor.
Please refer to the serverboard description pages on our web site for a complete
listing of supported processors (www.supermicro.com).
Memory
The C2SBX has four 240-pin DIMM slots that can support up to 8 GB of non-ECC
unbuffered DDR3-1333/1066/800 SDRAM. Single channel and dual-channel inter-
leaved confi gurations are supported. Modules of the same size and speed should
be used. See Chapter 5 for details.
Serial ATA
A SATA controller is integrated into the South Bridge (ICH9R) section of the chipset
to provide a six-port Serial ATA subsystem, which is RAID 0, 1, 10 and 5 capable.
The Serial ATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The C2SBX has two PCI-E 2.0 x16 slots, one PCI-E x1 slot, two 64-bit PCI-X
133/100 MHz slots and two 32-bit PCI slots.
Onboard Controllers/Ports
One fl oppy drive controller and two onboard ATA/100 controllers are provided to
support up to two IDE hard drives or ATAPI devices (one IDE connection is reserved
for a Compact Flash card). The color-coded I/O ports include two COM ports, six
USB 2.0 ports, PS/2 mouse and keyboard ports, one Gb Ethernet port and six HDA
(High Defi nition Audio) ports.