Supero SuperWorkstation 5035B-T, User Manual

Page: 20 / 118

2-4
S
UPER
W
ORKSTATION 5035B-T User's Manual
See the installation and removal sections for the peripheral drives in Chapter
6.
Check the Serial ATA disk drives: Depending upon your system's confi gura-
tion, your system may have up to four Serial ATA drives already installed. If
you need to install or remove an SATA drive, please refer to the appropriate
section in Chapter 6.
Check the airfl ow: Cooling air is provided by a 9-cm internal cooling fan and
a 12-cm fan that is built in to the power supply. The system component layout
was carefully designed to promote suffi cient airfl ow throughout the chassis.
Also note that all power and data cables have been routed in such a way that
they do not block the airfl ow generated by the fan. Please keep this in mind
when rerouting or adding/removing cables.
Supplying power to the system: The last thing you must do is to provide input
power to the system. Plug the power cord from the power supply unit into a
high-quality power strip that offers protection from electrical noise and power
surges. It is recommended that you use an uninterruptible power supply
(UPS).
2.
3.
4.