Supero SuperWorkstation 5035B-T, User Manual

Page: 45 / 118

Chapter 5: Advanced Serverboard Setup
5-17
Speaker
A speaker header is loc ated at
J9. See the table on the right for
pin defi nitions. Note : The speaker
header pins are for use with an ex-
ternal speaker. If you wish to use the
onboard speaker, you need to close
pins 3-4 with a jumper.
Speaker Header/Jumper
Pin Defi nitions (J9)
Pin Setting Defi nition
Pins 3-4 Internal Speaker
Pins 1-4 External Speaker
SGPIO Header
Two SGPIO (Serial General Purpose
Input/Output) headers are designated
SGPIO1 and SGPIO2. These head-
ers are used to communicate with a
system-monitoring chip on the back-
plane. See the table on the right for
pin defi nitions.
SGPIO Header
Pin Defi nitions (SGPIO1/SGPIO2)
Pin# Defi nition Pin Defi nition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
NC = No Connection
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Serial Ports
Two serial ports are included on the
backpanel of the C2SBX. See the
table on the right for pin defi nitions.
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC