Supero SuperWorkstation 5035B-T, User Manual

Page: 68 / 118

7-4
S
uper
W
orkstation 5035B-T User's Manual
Native Mode Operation
Select Serial ATA to use the SATA mode, or select Auto to use the Native
Mode for ATA. The options are: Serial ATA and
Auto .
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID Functions. (For the Windows OS
environment, use the RAID driver if this feature is set to Enabled. When this
item is set to Enabled, the item: ICH RAID Code Base will be available for you
to select either Intel or Adaptec Host RAID fi rmware to be activated. If this item
is set to Disabled , the item-SATA AHCI Enable will be available.) The options
are Enabled and Disabled .
ICH RAID Code Base
Select Intel to enable the Intel SATA RAID fi rmware. Select Adaptec to use the
Adaptec HostRAID fi rmware. The options are Intel and Adaptec .
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take
caution when using this function. This feature is for advanced programmers only.
The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the
IAA Driver is used.) The options are Enabled and Disabled .
SATA AHCI Legacy
Select Enable to use Legacy Mode for SATA Advanced Host Interfacing. When
this feature is set to Enabled, SATA Port 5 and SATA Port 6 are disabled. (Take
caution when using this function. This feature is for advanced programmers only.)
The options are Enabled and Disabled .
IDE Primary Master/Slave, IDE Secondary Master/Slave, SATA
Port3 and SATA Port4, Extended Primary Master/Slave
These settings allow the user to set the parameters of IDE Primary Master/Slave,
IDE Secondary Master/Slave, SATA Port3/SATA Port4 and Extended Primary
Master/Slave slots. Hit <Enter> to activate the following sub-menu screen for
detailed options of these items. Set the correct confi gurations accordingly. The
items included in the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. Select Auto to
allow the BIOS to automatically confi gure the parameters of the HDD installed
on a slot. Enter a number between 1 to 39 to select a predetermined HDD type.
Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable
disk drive is installed.