Supero SUPERSERVER 6016T-NTF, User Manual

Page: 69 / 120

Chapter 5: Advanced Serverboard Setup
5-21
BMC/PHY Reset
Jumper JPRST1 allow the user to reset
the Winbond WPCM450 BMC (Base-
board Management Controller) chip
and the PHY chip. The default is set
to Open for normal operation. See the
table on the right for jumper settings.
BMC/PHY
Jumper Settings (JPRST1)
Jumper Setting De fi nition
Closed Reset BMC & PHY
Open Normall
Note:
For more information on IPMI con fi guration instructions, please refer to the
Embedded Winbond BMC IPMI user guide posted on our website:
http://www.supermicro.com/support/manuals/.
ME Mode Select
Closing jumper JP3 allows the user to
bypass the SPI
fl ash security and allow
the manufacturer to fl ash the BIOS on
the production line. See the table on
the right for jumper settings.
ME Mode Select
Jumper Settings (JP3)
Jumper Setting De fi nition
Open Normal
Closed Manufacture Mode
ME Recovery
Jumper JP5 allows the user to select
the ME Firmware Recovery Mode for
BIOS or
fi rmware recovery. When in
this mode, only essential system func-
tions will be supported. This mode can-
not be used for online BIOS upgrades.
See the table on the right for jumper
settings.
ME Recovery Select
Jumper Settings (JP5)
Jumper Setting De fi nition
Open Normal
Closed ME Recovery