Supero SUPERSERVER 6016T-NTF, User Manual

Page: 115 / 120

Appendix B: Installing Windows
B-1
Appendix B
Installing Windows
After all hardware components have been installed, you must fi rst con fi gure Intel
South Bridge RAID Settings before you install the Windows OS and other software
drivers. To con
fi gure RAID settings, please refer to RAID Con fi guration User Guides
posted on our web site at www.supermicro.com/support/manuals.
B-1 Installing the Windows OS for a RAID System
1. Insert Microsoft's Windows Setup CD in the CD driver and the system will
start booting up from the CD.
2. Press the <F6> key when the message "Press F6 if you need to install a third
party SCSI or RAID driver" displays.
3. When the Windows OS Setup screen appears, press "S" to specify additional
device(s).
4. Insert the driver diskette "Intel AA RAID Windows Driver for ICH10R" into the
fl oppy drive and press the <Enter> key.
5. Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in
the Windows OS Setup Screen, and press the <Enter> key.
6. Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do so at this time.) Once all
devices are speci
fi ed, press the <Enter> key to continue with the installation.
7. From the Windows OS Setup screen, press the <Enter> key. The Windows
OS Setup will automatically load all device fi les and then, continue the Win-
dows OS installation.
8. After the Windows OS Installation is complete, the system will automatically
reboot.