Supero SUPERSERVER 6016T-NTF, User Manual

Page: 11 / 120

1-3
Chapter 1: Introduction
Graphics Controller
The X8DTU-F features an integrated Matrox G200eW graphics chip, which includes
8 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3 Server Chassis Features
The 6016T-URF/6016T-NTRF is built upon the SC815TQ-R650UBP chassis while
the 6016T-UF/6016T-NTF is built upon the SC815TQ-560UBP chassis. Details on
the chassis and on servicing procedures can be found in Chapter 6.The following
is a general outline of the main features of both chassis.
System Power
The SC815TQ-R650UBP features a redundant 650W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
The SC815TQ-560UBP features a single 560W power supply module. The system
must be shut down when replacing or removing this power supply module.
SATA Subsystem
The SC815TQ-R650UBP/SC815TQ-560UBP chassis was designed to support
four hot-swap SATA hard drives.
Note:
In the 6016T-NTRF/6016T-NTF, SATA drives are connected to the onboard
SATA ports.
PCI Expansion Slots
6016T-URF/6016T-UF: A riser card (RSC-R1UU-E8PR, optional) on the right side
of the chassis can support AOC-PG-i2+ add-on card to provide two Gb LAN ports.
The left side supports a UIO card and one PCI-E x16 card. These two systems can
support four SAS/SATA drives with an optional UIO SAS card. See our web site for
details (http://www.supermicro.com/products/nfo/UIO.cfm).