Supero SUPERSERVER 6016T-NTF, User Manual

Page: 108 / 120

7-20
S
UPER
S
ERVER 6016T-URF/6016T-UF/6016T-NTRF/6016T-NTF User's Manual

SET PEF Confi guration
PEF Support
Select Enabled to enable the function of Platform Event Filter (PEF) which will
interpret BMC events and perform actions based on pre-determined settings or
'traps' under IPMI 1.5 speci
fi cations. Powering the system down or sending an
alert when a triggering event is detected. The default is
Disabled.
The following will appear if PEF Support is set to Enabled.
PEF Action Global Control (Available if the item-PEF Support is enabled)
These are the different actions based on BMC events. The options are
Alert
,
Power Down, Reset System, Power Cycle, OEM Action, Diagnostic Interface.
Alert Startup Delay (Available if the item-PEF Support is enabled)
This feature inserts a delay during startup for PEF alerts. The options are En-
abled and
Disabled
.
PEF Alert Startup Delay (Available if Alert Startup Delay is enabled)
This sets the pre-determined time to delay PEF alerts after system power-ups
and resets. Refer to Table 24.6 of the IPMI 1.5 Speci
fi cation for more information
at www.intel.com. The options are
No Delay
, 30 sec, 60 sec, 1.5 min, 2.0 min.
Startup Delay (Available if the item-PEF Support is enabled)
This feature enables or disables startup delay. The options are Enabled and
Disabled
.
PEF Startup Delay (Available if the item-Startup Delay is enabled)
This sets the pre-determined time to delay PEF after system power-ups and
resets. Refer to Table 24.6 of the IPMI 1.5 Speci
fi cation for more information at
www.intel.com. The options are
No Delay
, 30 sec, 60 sec, 1.5 min, 2.0 min.
Event Message for PEF Action (Available if the item-PEF Support is
enabled)
This enables of disables Event Messages for PEF action. Refer to Table 24.6 of
the IPMI 1.5 Speci
fi cation for more information at www.intel.com. The options
are
Disabled
and Enabled.
BMC Watch Dog Timer Action
Allows the BMC to reset or power down the system if the operating system hangs
or crashes. The options are
Disabled
, Reset System, Power Down, Power Cycle.